Monstrum Beast 6-24×50 Rifle Scope: Comprehensive Spec Breakdown

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

The Monstrum Beast 6-24×50 is an extreme-magnification variable rifle optic built on a 30mm aluminum chassis, engineered specifically for target engagement at extended distances. Combining a 6x to 24x magnification curve with a wide 50mm objective lens, a specialized fiber-optic illuminated reticle, and an included one-piece cantilever mount, the system delivers high optical magnification and target acquisition features in a self-contained bench-ready package.

This optic suits benchrest shooters, varmint hunters, and long-range paper punchers who require heavy zoom capabilities and daylight-bright reticle illumination without sourcing separate mounting rings. Conversely, shooters who require dynamic sub-tension scaling across all magnifications or those building ultralight brush carbines better served by a compact bushnell trophy scope should look elsewhere due to the physical footprint of a 50mm objective chassis.

1

Best Seller

Monstrum Beast 6-24x50 Rifle Scope with Side Focus

MonstrumTactical

9.6 /10

ACMS Score

Our score is out of 10, based on listed specifications and buyer feedback. We do not test the products ourselves.

Updated: Sep 18, 2026

Last update on Sep 18, 2026 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Creators API.

View on Amazon

Magnification Curve and Optical Architecture

A technical assessment of the Monstrum Beast rifle scope specs starts at the optical geometry of its 6-24x magnification assembly. Offering a 4x zoom ratio, the optic spans from a baseline 6x power suitable for mid-range target spotting up to an extreme 24x magnification intended for fine identification of distant target markers. At 6x, the 50mm objective lens generates an exit pupil of approximately 8.33mm, flooding the ocular lens with light and providing a forgiving eye box during positional changes. However, cranking the magnification ring to the maximum 24x setting constricts that exit pupil down to roughly 2.08mm. This reduction demands consistent, repeatable cheek weld discipline, as any slight head deviation will introduce edge shadowing or optical blackout.

The 50mm objective diameter is a critical mechanical asset for an optic operating in the 24x bracket. Optical brightness is heavily dictated by objective surface area, and the 50mm bell allows for increased light transmission compared to conventional 40mm or 44mm alternatives, widening the total field of view at lower power bands. When evaluating the Monstrum Beast for long range target applications, that optical throughput ensures the target plate or paper bullseye remains legible in varied environmental light. The manufacturer notes enhanced light transmission and field of view, though specific glass glass coating layers and chemical light transmission indexes are details the listing does not specify.

In terms of footprint, understanding the Monstrum 6-24×50 scope dimensions is essential for receiver and barrel clearance. The listing does not specify the exact overall end-to-end length or bare weight in ounces, meaning rifle builders running low-profile actions or heavy varmint barrels must calculate clearance using the 50mm objective outer housing and the provided cantilever mount height. Shooters looking for forward-scout placement configurations will find this traditional long-range layout fundamentally different from specialized forward-mount glass like a burris scout scope, making the Beast explicitly dedicated to over-action receiver mounting.

Reticle Illumination and Second Focal Plane Dynamics

The Monstrum Beast fiber optic reticle departs from standard glass-etched or wire configurations through its physical illumination pathway. Rather than relying entirely on LED side-projectors bouncing light across etched glass, the Beast channels its illumination source through an integrated fiber-optic filament directly to the center intersection. This architectural design creates a daylight-bright center dot that mimics the focal punch of an unmagnified reflex optic while maintaining the precision crosshair framework necessary for precision rifle shooting. For rapid target acquisition against dense backgrounds, this bright center dot isolates the exact point of aim without washing out the entire target picture.

From an optical configuration standpoint, the Beast uses a second focal plane (SFP) arrangement. When analyzing Monstrum Beast SFP vs FFP trade-offs, the SFP layout ensures that the reticle dimensions remain physically static across the entire zoom curve. At 6x magnification, the reticle crosshairs do not shrink into microscopic hairlines, and at 24x, they do not expand to obscure small targets. However, the technical caveat of an SFP assembly is that angular holdover sub-tensions (such as hash marks for elevation drop and windage deflection) are only mathematically calibrated to true scale at one specific magnification setting, typically the maximum power. Target shooters must account for this fixed scale when calculating holdovers rather than dialing turrets.

Monstrum provides multiple Monstrum Beast reticle options across this product series, including the FIB04-MOA, FIB04-MIL, FIB05, and FIB06 designs. The unit under evaluation comes configured with the FIB04-MOA reticle, pairing minute-of-angle visual hash marks with the fiber-optic center point. Shooters who prefer milliradian ballistics can select the FIB04-MIL configuration, while the FIB05 and FIB06 designs offer alternative reticle layouts. This flexibility mirrors dedicated hunting glass where reticle choice must align with specialized ballistic drop curves, such as the muzzleloader-specific reticle seen on the leupold vx freedom ultimate slam muzzleloader scope.

Parallax Correction and Side Focus Mechanics

Operating an optical system at 24x magnification without parallax compensation introduces severe target displacement, making the Monstrum Beast 6-24×50 side focus turret an essential mechanical component. Parallax error occurs when the target image formed by the objective lens does not align perfectly on the same physical plane as the internal reticle. If the shooter shifts their eye off-center behind the ocular lens, the reticle appears to wander across the target face, resulting in missed shots regardless of mechanical zero.

The side focus dial integrated into the left turret housing resolves this optical deviation by physically repositioning internal lens elements to bring the focal plane of the target into exact convergence with the reticle. Rotating the side focus turret sharpens target resolution at varying yardages while simultaneously eliminating apparent reticle drift. This optical alignment is mandatory when shooting small-aperture targets at 100, 300, or 600 yards, where slight angular discrepancies amplify downrange impact deviations.

Beyond parallax elimination, the side focus dial serves as a range estimation aid. Because depth of field shrinks significantly as magnification reaches 24x, the focal plane window becomes paper-thin. By slowly adjusting the side focus knob until target details achieve maximum optical sharpness, a shooter can read the dial marking to approximate the distance to the target. While practical for range confirmation, precise dial distance calibration markings and minimum focusing distances are specifications the listing does not specify.

Chassis Construction and Cantilever Mount Integration

The structural foundation of the Beast is built upon an aluminum 30mm main tube. Compared to older 1-inch standard tube designs, a 30mm diameter housing provides elevated structural rigidity against recoil impulse and provides a larger internal cavity. This expanded internal space allows greater movement for the erector tube mechanism, accommodating broader internal travel for elevation and windage corrections, though exact click values and total travel range are details the listing does not specify.

A distinct advantage of this product package is the inclusion of the Monstrum one-piece cantilever scope mount. Cantilever offset mount compatibility is critical on flat-top receiver rifles, where standard bolt-action rings frequently position the optic too low or too far rearward, preventing proper eye relief. The offset cantilever geometry shifts the 30mm clamping rings forward over the receiver-handguard junction while maintaining a rigid cross-bolt clamp on standard rail systems. This eliminates the necessity of purchasing aftermarket mounting hardware to achieve proper head positioning.

In addition to standard rifle deployment, the manufacturer lists the optic and mounting hardware as compatible with shotgun platforms, indicating the internal mechanical assembly is engineered to withstand heavy, sharp recoil impulses. The listing also details a 1/2″-20 UNC thread type on the chassis assembly. For optical lens element maintenance and environmental protection during transport, the scope includes a set of flexible bikini lens covers that shield the 50mm objective lens and ocular assembly from dust and abrasion.

Monstrum Beast 6-24×50 Pros and Cons

Check Monstrum Beast 6-24×50 on Amazon

FAQ